CS1-D507S 20-50V dc 7A 500kHz Leadshine Step 2 Fazlı Geliştirilmiş Kapalı Döngü Kademeli Sürücü

Features

• 20-50VDC supply voltage, max 7A output current
• No loss of step, No hunting, No torque reservation, No tuning
• Step & direction or CW/CCW control modes
• Enhance performance at low speed application( 30-120 RPM)
• Max 500 KHz input frequency
• Brake output without connecting a relay
• Encoder A/B/Z outputs
• Switch Setting: Microstep, Direction, Pulse Mode, Positional command filter, Encoder resolution, Gain adjustment and output current, 5V / 24V logical voltage selector
• CE certified and RoHS complian
• 

• Model:	CS1-D507S
  Phase:	2
  Control Mode:	Step & Direction, CW & CCW
  Max Input Frequency:	500 KHz
  Input Voltage Range:	20 - 50 VDC
  Suggested Power Supply Voltage Range:	24 - 48 VDC
  Software Cofig. Microstep Range:	200 - 512,000 (increased by 200)
  # of DIP Switch Microstep Configurations:	16
  DIP Switch Microstep Settings:	400, 1000, 1600, 2000, 3200, 3600, 4000, 5000, 6400, 8000, 10000, 20000, 25000, 36000, 40000, 50000
  Software Cofig. Current Range:	0.5 - 7.0 A (increased by 0.1 A)
  DIP Switch Functions:	Microstep, motor direction, auto-tuning, pulse mode, open/closed loop selection, filter time, encoder resolution, 5 / 24V logic voltage selection
  Encoder Resolution:	1000 ppr, 2000 ppr, 2500 ppr, 2500 ppr, 5000 ppr
  Logic Current Range:	7 - 16 mA (10mA typical)
  Logic Voltage range:	0-0.5 VDC for pulse active low, or 4.5-5 VDC (or 23-24 VDC optional) for pulse active high
  Communication Type:	RS232 for tuning
  Pulse enabled at:	Falling edge
  Idle Current Percentage:	50% or 90%
  Software Config. Idle Current Percentage:	0 - 100%
  # of Digital Inputs:	3
  Digital Outputs:	Fault outout; brake control; in-position output; encoder A±/B±/Z± outputs
  Step Width:	1,000 ns
  Minimal Direction Setup Time:	2,000 ns
  Protection:	Over current; over voltage; chip error; motor cable error; ROM error; auto-tuning error; position following error;
  Isolation Resistance:	500 Mohm
  Environment:	Avoid dust, oil fog and corrosive gases
  Operating Temperature:	0 - 50 °C
  Humidity:	40 - 95% RH
  Vibration:	5.9 m/s2 Max
  Storage Temperature:	-20 - 65°C
  Mechanical:	118 * 79.5 * 25.5 mm
  Weight:	280g