| nput Voltage |
90 ~ 264Vac 127 ~ 370Vdc |
| Input Frequency |
47 ~ 63Hz |
| Input Current |
1A/ 100Vac |
| Inrush Current |
40A/ 230Vac |
| Leakage Current |
0.25mA/ 240Vac |
| LED Indicator |
Green LED ON : <200mA Red LED ON : >200mA of charge current |
| Set Up, Rise, Hold Time |
200ms, 50ms, 16ms at full load |
| Over Load Protection |
90 ~ 110% Constant current mode and over 300% pulsing mode |
| |
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
110 ~ 135% rated output voltage |
| |
Clamp by zener diode |
| Over Temperature Protection |
IC1Tj130°C |
| |
Shut down o/p voltage, recovers automatically after temperature goes down |
| Working Temperature |
0°C to +50°C (Refer to output load derating curve) |
| Working Humidity |
20% ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-20°C to +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min.each along X,Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC |
| Isolation Resistance |
I/P-O/P:100M Ohms / 500VDC / 25°C/ 70% RH |
| Safety Standards |
UL60950-1, CSA22.2, EN60950-1 Approved |
| EMC |
Compliance to EN55014-1 class B, FCC part 15 Class B, EN61000-3-2,3, |
| |
EN61000-4-2,3,4,5,6,11, Light industry level, criteria A |
| DC Plug |
2.1 x 5.5 x 11mm centre positive tuning fork connector |
| DC Cable |
18AWG UL1185 6ft and 4ft for 4.2~8.4V output only |
